• Breton: meutad
• Bulgarian: инч (inč)
• Danish: tomme
• Dutch: duim
• Estonian: toll
• Finnish: tuuma
• French: pouce
• Galician: pulgada
• German: Zoll
• Italian: pollice
• Japanese: インチ (inchi)
• Lithuanian: colis
• Norwegian: tomme
• Polish: cal
• Portuguese: polegada
• Romanian: ţol
• Russian: дюйм (djujm)
• Spanish: pulgada

• Bulgarian: милиметър (milimetǎr)
• Dutch: haarbreed
• Finnish: tuuma
• German: Zoll
• Lithuanian: plaukas
• Norwegian: tomme , millimeter
• Polish: włos

• ttbc Chinese: 英寸 (yīng cùn)
• ttbc Spanish: pulgada
• ttbc Welsh: modfedd

Verb

1. (intransitive, followed by a preposition) To move very slowly (in a particular direction).

   Fearful of falling, he inched along the window ledge.

Related terms

• inch along
• inch forward
• inch up
• inchworm

Translations

See also

• thou
• mil

Inches redirects here. To see the Les Savy Fav album, see Inches. For the measure of Precipitation in inches, see rain gauge.

An inch (plural: inches; symbol or abbreviation: in or, sometimes, ″ - a double prime) is the name of a unit of length in a number of different systems, including English units, Imperial units, and United States customary units. Its size can vary from system to system. There are 36 inches in a yard and 12 inches in a foot. A corresponding unit of area is the square inch and a corresponding unit of volume is the cubic inch.

The inch is the virtually universal unit of measurement in the United States, and is very commonly used in Canada and the United Kingdom. In the US and the UK, personal heights are expressed in feet and inches by people of all ages. In Canada, personal heights are shown in metric units on official documents such as a person's driver's license.

International inch

In 1958 the United States and countries of the Commonwealth of Nations defined the length of the international yard to be 0.9144 metres. Consequently, the international inch is defined to be equal to 25.4 millimetres.

The international standard symbol for inch is in (see ISO 31-1, Annex A). In some cases, the inch is denoted by a double prime, which is often approximated by double quotes, and the foot by a prime, which is often approximated by an apostrophe. The two parts are then separated by a dash. For example, 6 feet 2 inches is denoted by 6′-2″.

Equivalence to other units of length

1 international inch is equal to:

• 1,000 thou (1 thou is 0.001 inches.)
• about 0.08333 feet (1 foot is equal to 12 inches.)
• about 0.02778 yards (1 yard is equal to 36 inches.)
• 2.54 centimetres (1 centimetre is equal to about 0.3937 international inches.)

Use of the inch

Even in countries where the metric system is commonplace, the inch is still sometimes used to refer to

• the size category of computer displays, image sensors, and television screens,
• threads and diameters of pipes (see ISO 228 and Nominal Pipe Size),
• bicycle and automobile tires and rims (see ISO 5775 and Tire_code),
• gramophone records,
• width of computer floppy diskettes,
• diameter of cigars and
• pizza size.

Historical origin

The origin of the inch is disputed. Historically, in different parts of the world (even different cities within the same country) and at different points in time, the inch has referred to similar but different standard lengths.

The English word inch comes from Latin uncia meaning "one twelfth part" (in this case, one twelfth of a foot); the word ounce (one twelfth of a troy pound) has the same origin.

In some other languages, the word for "inch" is similar to or the same as the word for "thumb"; for example, French: pouce inch, pouce thumb; Italian: pollice inch, pollice thumb; Spanish: pulgada inch, pulgar thumb; Portuguese: polegada inch, polegar thumb; Swedish: tum inch, tumme thumb; Dutch: duim inch, duim thumb; Sanskrit: Angulam inch, Anguli Finger.

Given the etymology of the word "inch", it would seem that the inch is a unit derived from the foot, but this was probably only so in Latin and in Roman times. In English, there are records of fairly precise definitions for the size of an inch (whereas the definitions for the size of a foot are probably anecdotal), so it seems that the foot was then defined as 12 times this length. For example, the old English ynche was defined (by King David I of Scotland in about 1150) as the width of an average man's thumb at the base of the nail, even including the requirement to calculate the average of a small, a medium, and a large man's measures. To account for the much larger length later called an inch, there are also attempts to link it to the distance between the tip of the thumb and the first joint of the thumb, but this may be speculation.

There are records of the unit being used circa AD 1000 (both Laws of Æthelbert and Laws of Ælfred). An Anglo-Saxon unit of length was the barleycorn. After 1066, 3 barleycorn was equal to 1 inch; it is not clear which unit was the base unit and which the derived unit.

One source says that the inch was at one time defined in terms of the yard, itself supposedly defined as the distance between Henry I of England's nose and his thumb. This is unlikely as Henry was born in 1068.

Prior to the adoption of the international inch (see above), the United Kingdom and other countries of the Commonwealth of Nations defined the inch in terms of the Imperial Standard Yard. The United States and Canada each had their own, different, definition of the inch, defined in terms of metric units. The Canadian inch was defined to be equal to 25.4 millimetres.

Metric or decimal inch

A metric inch is the equivalent of an inch under a proposal for the metrification and unification of the English system of measures. It is now considered to be a strange unit of measurement.

In Sweden, between 1855 to 1863, the existing Swedish "working inch" (24.74 mm) was replaced by a "decimal inch" (29.69 mm) which was one tenth of the Swedish foot. Proponents argued that a decimal system simplifies calculations. However, having two different Swedish inch measures (and an English inch on top of that) proved to be complicated. Between 1878 to 1889 it was agreed to introduce the metric units. However, the decimal inch survived in some building construction trades, and decimal fractions (tenths, hundredths, thousandths) of the foot are still used in land surveying.

See also

• English unit
• Imperial unit
• United States customary units
• Gry
• Pyramid inch
• Guz

ace, amble, bit, bowshot, brief span, claudicate, close quarters, close range, crack, crawl, creep, crowd, dogtrot, drag, drag along, drag out, drive on, earreach, earshot, forge ahead, go dead slow, go on tiptoe, go slow, grovel, gumshoe, gunshot, hair, hair space, hairbreadth, hairsbreadth, hobble, idle, inch along, inch forward, jog-trot, laze, limp, little, little ways, mosey, muddle through, nightwalk, pad, pistol shot, poke, poke along, press forward, press on, prowl, push, push forward, push on, pussyfoot, saunter, scrabble, scramble, short distance, short piece, short way, shuffle along, sidle, slink, snake, sneak, span, spitting distance, stagger along, steal, steal along, step, stroll, tippytoe, tiptoe, toddle, toddle along, totter along, traipse, waddle, walk, worm, worm along